Stainless steel Berkey Spigot
Will fit all stainless steel Berkey Filters This is a very attractive addition to any Stainless Steel Berkey system and should give years of service
- Stainless Steel Construction
- No Lead
Before installation, wash in soapy water and rinse suggested Remove the nut, and one set of washer, gasket from the spigot Insert the spigot to the opening in the lower chamber Install the gasket and washer Tight the nut. Usually hand-tight is good enough to create a water tight seal. You can also use 3/4 in wrench. Do not over-tighten, it could bend the stainless canister.
Package Content:
1 stainless steel spigot, 2 stainless steel washer, 2 silicon gasket, 1 stainless Steel nut.
E-mail H2oFilters.Com MATRIKX® is a licensed trademark of KX Technologies LLC, MATRIKX+CTO® is a licensed trademark of KX Technologies LLC , PLEKX® is a licensed trademark of KX Technologies LLC, CTO® is a licensed trademark of KX Technologies LLC, Pb1® is a licensed trademark of KX Technologies LLC, CR1® is a licensed trademark of KX Technologies LLC, ![]()
"There's no tragedy in life like the death of a child. Things never get back to the way they were."
"Love your child as if there is no tomorrow." Do-It-Yourself Water Filtration Products from Doulton Ceramic Filters, Rainshower Shower Filters, Kx Carbon Block Filters, WaterWise, Genesis Distiller, British Berkefeld, Berkey, Filmtec Reverse Osmosis Membranes, Katadyn, and other fine water filters. We have "No Plumber Required" Countertop Water filters, Under Counter water filters, and Gravity feed water filters all for the do it yourselfer ![]() Note: Some Berkey Products are not yet available for shipment to California and Iowa PRICES SUBJECT TO CHANGE WITHOUT NOTICE. © 1996 - 2023 H2ofilters.com All Rights reserved. |